Ova web stranica koristi ili se može koristiti kolačićima (cookies). Nastavkom pregledavanja pristajete na uporabu svih kolačića. Ako želite znati više ili odbiti suglasnost, kliknite ovdje.

Meinberg Lantime M300/GPS

Meinberg Lantime M300/GPS

The Meinberg LANTIME M300 time server provides accurate time to networks of any size. It synchronizes all NTP- or SNTP-compatible systems. The M300 time server uses as a reference time source either any compatible external or built-in Meinberg reference clock (Stratum 1 mode) or up to 7 NTP servers (Stratum 2 mode).

Product Description

A large display shows the state of the NTP subsystem. The configuration of the system can be done by using a standard web browser to access the extensive but straight forward html interface. Alternatively a text based and menu driven setup utility can be started from the shell prompt after logging into the unit via Telnet or SSH. Because of its modular system architecture it is possible to equip this LANTIME time server with up to six ethernet ports, even fiber optic network ports and one or three Gigabit Ethernet ports are available as an option.

 

Selectable Reference Time Sources:

  • GPS: Satellite receiver for the Global Positioning System
  • GLN: Combined GPS/GLONASS satellite receiver (L1 frequency band), can also be used for mobile applications
  • PZF: DCF77 correlation receiver for middle europe
  • MSF: Long wave receiver for Great Britain
  • WWVB: Long wave receiver for the US time signal
  • TCR: Time code receiver for IRIG A/B, AFNOR or IEEE1344 codes
  • MRS: (GPS, PPS, 10MHz, NTP): Multi Reference Source - several reference sources, adjustable following priority of signal
  • RDT: (external PPS or NTP): Time Server without internal receiver module

Synchronization of NTP and SNTP compatible clients

Web-based status and configuration interface (Demo) and console-based graphical configuration utility

Supported net protocols: IPv4, IPv6, NTP, (S)NTP, DAYTIME, DHCP, HTTP, HTTPS, FTP, SFTP, SSH, SCP, SYSLOG, SNMP, TIME, TELNET

Alert-Notification system of status change by Email, WinMail, SNMP or an external connected display

Full SNMP v1,v2,v3 support with own SNMP-daemon for status and configuration and SNMP Trap messages

USB Port for installing firmware updates, locking frontpanel menu access and backup/restore of configuration and log files

Meinberg GPS Antenna/Converter Unit connected with up to 300m of standard coaxial cable RG58

Meinberg's LANTIME time server is available with a variety of additional output options: IRIG Time Code, frequency synthesizer and programmable pulse outputs illustrate some of the many expansion options for your NTP server

Two (standard) or optional up to six independant RJ-45 ethernet interfaces 10/100 MBit


Documents/Downloads

    NTP time server
    DisplayLC-display, 2 x 40 characters, with backlight
    Control elementsEight push buttons to set up basic network parameters and to change receiver settings
    Status infoFour bicolor LEDs showing status of: - reference time - time service - network - alarm
    Frequency outputs10 MHz via female BNC connector, TTL into 50 Ohm Accuracy depends on oscillator (standard: TCXO), look at oscillator options
    Pulse outputsPulse Per Second (PPS), TTL level, pulse width: 200ms
    Accuracy of pulse outputsDepends on oscillator option: < ±100ns (TCXO, OCXO LQ) < ±50ns (OCXO MQ, OCXO HQ, OCXO DHQ)
    InterfaceTwo independent serial RS232-interfaces, menu configurable (in case of RDT models without internal receiver - the serial interfaces will be used as reference input).
    Optional Output SignalsAdditional Output Options:: This LANTIME NTP server comes with many additional outputs options: PPS, 10MHz, programmable pulse outputs (PPS, PPM, PPH, DCF_MARK ...), IRIG modulated and unmodulated time code, T1 / E1 telecom signals, Frequency Synthesizer - to name just a few. Contact us for your specific device configuration.
    Network InterfaceStandard: 2 x 10/100 MBit with RJ45 connector Available Options: •2 or 4 x additional 10/100 MBit with RJ45 •1 x 10/100 MBit and 1 x 10/100/1000 MBit (1GE) with RJ45 or 1 x 10/100 MBit and 3 x 10/100/1000 MBit (3GE) with RJ45 jack
    Power supplyStandard: 100-240 V AC (50/60 Hz) available DC variants: 100-240 V DC, 12 V DC and 19 - 72 V DC
    Universal Serial Bus (USB) Ports1x USB Port in front panel: - install firmware upgrades - backup and restore configuration files - copy security keys - lock/unlock front keys
    Single-Board-ComputerProcessor: AMD Geode™ LX 800 (500 MHz, 128 KB L2 cache, 3.6 W) Main Memory: onboard 256 MByte Flashdisk: 1 GB
    Operating System of the SBCLinux with nano kernel (incl. PPSkit)
    Network protocols OSI Layer 4 (transport layer)TCP, UDP
    Network protocols OSI Layer 7 (application layer)TELNET, FTP, SSH (incl. SFTP, SCP), HTTP, HTTPS, SYSLOG, SNMP
    Internet Protocol (IP)IP v4, IP v6
    Network Autoconfiguration SupportIPv4: Dynamic Host Configuration Protocol - DHCP (RFC 2131) IPv6: Autoconfiguration Networking - AUTOCONF
    Network Time Protocol (NTP)NTP v2 (RFC 1119), NTP v3 (RFC 1305), NTP v4 (RFC 5905) SNTP v3 (RFC 1769), SNTP v4 (RFC 2030) MD5 Authentication and Autokey Key Management
    Time Protocol (TIME)Time Protocol (RFC 868)
    Daytime Protocol (DAYTIME)Daytime Protocol (RFC 867)
    IEC 61850Synchronization of IEC 61850 compliant devices by using SNTP
    Hypertext Transfer Protocol (HTTP)HTTP/HTTPS (RC 2616)
    Secure Shell (SSH)SSH v1.3, SSH v1.5, SSH v2 (OpenSSH)
    TelnetTelnet (RFC 854-RFC 861)
    Simple Network Management Protocol (SNMP)SNMPv1 (RFC 1157), SNMPv2c (RFC 1901-1908), SNMP v3 (RFC 3411-3418)
    Form Factor19'' aluminium case (1U) Schroff Multipac
    Ambient temperature0 ... 50°C / 32 ... 122°F
    HumidityMax. 85%
    Scope of supplyIncluded in delivery is a MEINBERG outdoor antenna incl. mounting kit, pre-assembled antenna cable (except MRS, TCR and RDT models) and product documentation on USB storage.
    Technical SupportMeinberg offers free lifetime technical support via telephone or e-mail.
    WarrantyThree-Year Warranty
    Firmware UpdatesFirmware is field-upgradeable, updates can be installed directly at the unit or via a remote network connection. Software updates are provided free of charge, for the lifetime of your Meinberg product.
    RoHS-Status of the productThis product is fully RoHS compliant

    IMS - LANTIME M3000: Modular Time and Frequency Synchronization Platform

    PDFEnglish manual (ltos_6-17.pdf: 9440 KB, Rev.: 2015/08/28)
    PDFEnglish manual (ltos_6-18.pdf: 9632 KB, Rev.: 2015/08/28)
    PDFEnglish manual (m3000_base.pdf: 4160 KB, Rev.: 2015/07/28)
    PDFEnglish info sheet (info_ims-lantime-m3000.pdf: 115 KB, Rev.: 2015/08/31)

    IMS - LANTIME M1000: Time and Frequency Synchronization Platform in 1U Rackmount-Enclosure

    PDFEnglish manual (ltos_6-17.pdf: 9440 KB, Rev.: 2015/08/28)
    PDFEnglish manual (ltos_6-18.pdf: 9632 KB, Rev.: 2015/08/28)
    PDFEnglish manual (m1000_base.pdf: 3047 KB, Rev.: 2015/06/04) 

    IMS - LANTIME M500: Time and Frequency Synchronization in Rail Mount Chassis 

    PDFEnglish manual (ltos_6-17.pdf: 9440 KB, Rev.: 2015/08/28)
    PDFEnglish manual (ltos_6-18.pdf: 9632 KB, Rev.: 2015/08/28)
    PDFEnglish manual (m500_base.pdf: 3901 KB, Rev.: 2015/08/28)
    PDFEnglish info sheet (info_ims-lantime-m500.pdf: 85 KB, Rev.: 2015/08/31)

    LANTIME M900/GPS/PTP: Upgradeable IEEE 1588 Grandmaster and NTP Server with integrated satellite receiver in modular 3U case

    PDFEnglish manual (m900_ptpv2.pdf: 5822 KB, Rev.: 2014/07/31)
    PDFEnglish info sheet (info_lantime-m900-gps-ptpv2.pdf: 82 KB, Rev.: 2015/08/31)

    LANTIME M900: NTP Timeserver Platform for Customized Time and Frequency Synchronization Systems 
    PDFEnglish manual (m900_gps-2_scu_rps.pdf: 5604 KB, Rev.: 2014/08/01)
    PDFEnglish manual (m900_gps.pdf: 5717 KB, Rev.: 2014/08/01)
    PDFEnglish manual (m900_gps_pzf.pdf: 5259 KB, Rev.: 2014/08/01)
    PDFEnglish info sheet (info_lantime-m900.pdf: 126 KB, Rev.: 2015/08/31)

    LANTIME M600/MRS/PTP: PTPv2/IEEE 1588-2008 Ordinary Clock and NTP Time Server synchronized by GPS/1PPS/10MHz/IRIG/NTP/PTP 

    PDFEnglish manual (m600_mrs_ptpv2.pdf: 5309 KB, Rev.: 2014/07/31)
    PDFEnglish info sheet (info_lantime-m600-mrs-ptpv2.pdf: 55 KB, Rev.: 2015/08/31)

    LANTIME M600: High End NTP Time Server 

    PDFEnglish manual (ltos_6-16.pdf: 7706 KB, Rev.: 2015/06/15)
    PDFEnglish manual (m600_gps.pdf: 5128 KB, Rev.: 2014/07/31)
    PDFEnglish manual (m600_mrs-ptpv2.pdf: 4789 KB, Rev.: 2011/04/26)
    PDFEnglish manual (m600_mrs.pdf: 5601 KB, Rev.: 2014/07/31)
    PDFEnglish manual (m600_ptp2.pdf: 5261 KB, Rev.: 2014/07/31)
    PDFEnglish manual (m600_technical_ref.pdf: 1828 KB, Rev.: 2015/01/16)
    PDFEnglish manual (setup-guide_v6.pdf: 895 KB, Rev.: 2015/01/15)
    PDFEnglish info sheet (info_lantime-m600.pdf: 42 KB, Rev.: 2015/08/31)

    LANTIME M600/GPS/PTP: PTPv2 / IEEE 1588-2008 Grandmaster Clock and NTP Time Server with integrated GPS radio clock

    PDFEnglish manual (m600_ptp2.pdf: 5261 KB, Rev.: 2014/07/31)
    PDFEnglish info sheet (info_lantime-m600-gps-ptpv2.pdf: 43 KB, Rev.: 2015/08/31)

    LANTIME M600/GPS PTP: PTP/IEEE 1588 Grandmaster Clock and NTP Time Server with integrated GPS radio clock

    PDFEnglish manual (m600_ptp.pdf: 4926 KB, Rev.: 2011/10/27)
    PDFEnglish info sheet (info_ptp-time-server-gps.pdf: 43 KB, Rev.: 2015/08/31)

    LANTIME M400/GPS/PTP: PTPv2 / IEEE 1588-2008 Grandmaster Clock and NTP Time Server with integrated GPS radio clock

    PDF English manual (m400_gps-ptpv2.pdf: 4826 KB, Rev.: 2014/07/31)
    PDFEnglish info sheet (info_lantime-m400-gps-ptpv2.pdf: 70 KB, Rev.: 2015/08/31)

    LANTIME M400: Rail Mount NTP Time Server with MEINBERG reference receiver

    PDFEnglish manual (ltos_6-16.pdf: 7706 KB, Rev.: 2015/06/15)
    PDFEnglish manual (m400_gps-ptpv2.pdf: 4826 KB, Rev.: 2014/07/31)
    PDFEnglish manual (m400_gps.pdf: 4720 KB, Rev.: 2014/07/31)
    PDFEnglish manual (m400_lne_technical_ref.pdf: 1672 KB, Rev.: 2015/01/16)
    PDFEnglish manual (m400_mrs-ptpv2.pdf: 5153 KB, Rev.: 2014/07/31)
    PDFEnglish manual (m400_mrs.pdf: 4871 KB, Rev.: 2014/07/31)
    PDFEnglish manual (setup-guide_v6.pdf: 895 KB, Rev.: 2015/01/15)
    PDFEnglish info sheet (info_lantime-m400.pdf: 57 KB, Rev.: 2015/08/31)

    LANTIME M300: NTP Server in 1U Case for Server Rackmount 

    PDFEnglish manual (ltos_6-16.pdf: 7706 KB, Rev.: 2015/06/15)
    PDFEnglish manual (m300_gln.pdf: 4523 KB, Rev.: 2014/07/29)
    PDFEnglish manual (m300_gps.pdf: 4953 KB, Rev.: 2014/07/29)
    PDFEnglish manual (m300_lne_technical_ref.pdf: 1466 KB, Rev.: 2015/01/15)
    PDFEnglish manual (m300_mrs.pdf: 5062 KB, Rev.: 2014/05/27)
    PDFEnglish manual (m300_msf.pdf: 3584 KB, Rev.: 2011/04/26)
    PDFEnglish manual (m300_pzf.pdf: 4030 KB, Rev.: 2014/02/17)
    PDFEnglish manual (m300_rdt.pdf: 3614 KB, Rev.: 2011/04/26)
    PDFEnglish manual (m300_tcr.pdf: 4227 KB, Rev.: 2014/07/28)
    PDFEnglish manual (m300_wwvb.pdf: 3661 KB, Rev.: 2011/04/26)
    PDFEnglish manual (setup-guide_v6.pdf: 895 KB, Rev.: 2015/01/15)
    PDFEnglish info sheet (info_lantime-m300.pdf: 40 KB, Rev.: 2015/08/31)

    LANTIME/PZF: NTP Time Server with integrated DCF77 radio clock

    PDFEnglish manual (1he_lanpzf_etx.pdf: 1548 KB, Rev.: 2011/04/26)
    PDFEnglish info sheet (info_lanpzf.pdf: 153 KB, Rev.: 2015/08/31)

    LANTIME/TCR: NTP Time Server with integrated IRIG timecode reader

    PDFEnglish manual (1he_lantcr_etx.pdf: 2048 KB, Rev.: 2011/04/26)
    PDFEnglish info sheet (info_lanirig.pdf: 152 KB, Rev.: 2015/08/31)

    LANTIME M200: Compact NTP Time Server with integrated Reference Clock

    PDFEnglish manual (ltos_6-16.pdf: 7706 KB, Rev.: 2015/06/15)
    PDFEnglish manual (m200_gps.pdf: 3966 KB, Rev.: 2014/04/24)
    PDFEnglish manual (m200_msf.pdf: 3899 KB, Rev.: 2014/04/24)
    PDFEnglish manual (m200_pzf.pdf: 3911 KB, Rev.: 2014/04/24)
    PDFEnglish manual (m200_technical_ref.pdf: 1192 KB, Rev.: 2015/01/15)
    PDFEnglish manual (m200_wwvb.pdf: 3931 KB, Rev.: 2014/04/24)
    PDFEnglish manual (setup-guide_v6.pdf: 895 KB, Rev.: 2015/01/15)
    PDFEnglish info sheet (info_lantime-m200.pdf: 39 KB, Rev.: 2015/08/31)

    LANTIME/RDT: NTP Time Server

    PDFEnglish manual (1he_lanrdt_etx.pdf: 2024 KB, Rev.: 2011/04/26)
    PDFEnglish info sheet (info_lanrd.pdf: 151 KB, Rev.: 2015/08/31)

    LANTIME M100: NTP Time Server with internal Reference Clock for DIN Rail Installations

    PDFEnglish manual (ltos_6-16.pdf: 7706 KB, Rev.: 2015/06/15)
    PDFEnglish manual (m100_gps.pdf: 4071 KB, Rev.: 2014/04/24)
    PDFEnglish manual (m100_pzf.pdf: 3895 KB, Rev.: 2014/04/24)
    PDFEnglish manual (m100_technical_ref.pdf: 1685 KB, Rev.: 2015/01/15)
    PDFEnglish manual (setup-guide_m100_v6.pdf: 1045 KB, Rev.: 2015/01/15)
    PDFEnglish info sheet (info_lantime-m100.pdf: 146 KB, Rev.: 2015/08/31)

    LANTIME/SHS/BGT: NTP Time Server with Integrated Highly Secure Hybrid Receiver Technology (GPS/DCF77) in 3U housing

    PDFEnglish manual (bgt_lanshspzf_etx.pdf: 2504 KB, Rev.: 2011/04/26)
    PDFEnglish info sheet (info_lanshs.pdf: 771 KB, Rev.: 2015/08/31)

    LANTIME/GPS/xHS: NTP Time Server with integrated GPS radio clock in railmount housing

    PDFEnglish manual (xhs_langps_etx.pdf: 752 KB, Rev.: 2011/04/26)
    PDFEnglish info sheet (info_lanahs.pdf: 67 KB, Rev.: 2015/08/31)

    SyncFire 1000: High-Performance NTP Time Server

    PDFEnglish manual (sync-fire-1000.pdf: 8908 KB, Rev.: 2015/08/27)
    PDFEnglish info sheet (info_sync-fire-1000.pdf: 81 KB, Rev.: 2015/08/31)

    PN#

    NTP Time Server Description

    LANTIME M100/GPS

    NTP Time Server for DIN mounting rails (1 x RJ45) GPS receiver, incl. GPSANT and 20m cable  

    LANTIME M100/GLN

    NTP Time Server for DIN mounting rails (1 x RJ45) GPS/GLONASS receiver, incl. antenna and 20m cable  

    LANTIME M200/GPS

    NTP Time Server in compact slimline housing (1 x RJ45) GPS receiver, incl. GPSANT and 20m cable  

    LANTIME M200/GLN

    NTP Time Server in 19" slimline housing (2 x RJ45) GPS/GLONASS receiver, incl. antenna and 20m cable  

    LANTIME M200/MB

    Mounting Brackets to install M200 in a 19" module cabinet

    LANTIME M200/PZF

    NTP Time Server in compact slimline housing (1 x RJ45) DCF77-PZF receiver, incl. AW02 and 10m cable

    LANTIME M300/GPS

    NTP Time Server in 19" slimline housing (2 x RJ45) GPS receiver, incl. GPSANT and 20m cable  

    LANTIME M300/GLN

    NTP Time Server in 19" slimline housing (2 x RJ45) GPS/GLONASS receiver, incl. antenna and 20m cable  

    LANTIME M300/PZF

    NTP Time Server in 19" slimline housing (2 x RJ45) DCF77-PZF receiver, incl. AW02 and 10m cable

    LANTIME M300/TCR

    NTP Time Server in 19" slimline housing (2 x RJ45) with IRIG timecode receiver  

    LANTIME M300/MRS

    NTP Time Server in 19" slimline housing (2 x RJ45) Reference inputs: GPS, PPS, IRIG, NTP

    LANTIME M300/RDT

    NTP Time Server in 19" slimline housing (2 x RJ45) remotely disciplined

    LANTIME M600/GPS

    NTP Time Server in 19" slimline housing (4 x RJ45) GPS receiver, incl. GPSANT and 20m cable

    LANTIME M600/GLN

    NTP Time Server in 19" slimline housing (2 x RJ45) GPS/GLONASS receiver, incl. antenna and 20m cable  

    LANTIME M600/MRS

    NTP Time Server in 19" slimline housing (4 x RJ45) Reference inputs: GPS, PPS, IRIG, NTP

    LANTIME M900/GPS/BGT

    NTP Time Server in 3U 19" modular case (1 x RJ45) GPS receiver, incl. GPSANT and 20m cable

    LANTIME M900/MRS/BGT    

    NTP Time Server in 3U 19" modular case (1 x RJ45) Reference inputs: GPS, PPS, IRIG, NTP

    • Model: Lantime M300/GPS
    • Dostupnost: Dostupno

    Tagovi: Meinberg, LANTIME M300, time server, NTP