Ova web stranica koristi ili se može koristiti kolačićima (cookies). Nastavkom pregledavanja pristajete na uporabu svih kolačića. Ako želite znati više ili odbiti suglasnost, kliknite ovdje.

eWorx SE300 Series

eWorx SE300 Series

Details

SE300 series is the industry’s first design for Ethernet Green®, IEEE802.3az - Energy Ethernet switches that cut power usage by up to 60%, significantly saving energy usage in the field and reducing total cost of ownership over 24/7.
Advantech B+B SmartWorx SE300 series monitored switches can be used as plug-and-play unmanaged switches right out of the box. Installing the iView² Network Management Software gives them basic monitoring and management capabilities as well. They bridge the gap between unmanaged switches and significantly more expensive, fully managed solutions.
When enabled with iView2, these switches provide IP address assignment, allowing for a static IP address or an address that is discoverable via DHCP in the network. Then, these switches have the ability to use Modbus/TCP to communicate with HMI/SCADA software and SNMP to communicate with NMS (Networking Management Software) at the same time. This gives full access control to both control engineers and IT managers.
 
Specifications
  • 5 to 18 ports
  • 10/100 and Gigabit options
  • Wide Temperature Range -40 to 75°C
  • DIN Rail or Wall/Panel Mountable
  • Dual 12 to 48VDC power inputs for redundancy
  • Energy Efficient Ethernet (EEE), IEEE 802.3az for low power applications
  • EMS level 3 protection
  • Designed for hazardous locations: UL C1D2, ATEX Zone 2 (pending), IECEx (pending)
  • Port-based QoS feature for deterministic data transmission
  • Loop detection and Event Alarm
  • Power Failure indicated by a Relay and LED indicator
  • Communicates with SCADA software via Modbus/TCP
  • Communicates with NMS (Networking management system) via SNMP


 Downloads

Prikaži:
Sortiraj po:

16-port 10/100Mbps + 2-port GbE Combo (SFP or Copper) Monitored Ethernet Switch

Communicates with HMI/SCADA software via Modbus/TCPIntegrated with iView2™ - SNMP Management Softwar..

16-port 10/100Mbps Monitored Ethernet Switch, SNMP, Modbus/TCP

• Communicates with HMI/SCADA software via Modbus/TCP• Integrated with iView2 - SNMP Management Soft..

5-port 10/100Mbps Monitored Ethernet Switch, SNMP, Modbus/TCP

• Communicates with HMI/SCADA software via Modbus/TCP• Integrated with iView2 - SNMP Management Soft..

8-port 10/100Mbps + 2-port GbE Combo (SFP or Copper) Monitored Ethernet Switch

Communicates with HMI/SCADA software via Modbus/TCPIntegrated with iView2™ - SNMP Management Softwar..

8-port 10/100Mbps Monitored Ethernet Switch, SNMP, Modbus/TCP

• Communicates with HMI/SCADA software via Modbus/TCP• Integrated with iView2 - SNMP Management Soft..